ThJET300 - JET 300 Thruster
arduino, drones, low-cost, raspberry, thruster, underwater
In Stock
The JET 300 is a patent-pending high performance underwater thruster,
The unusual profile of the thruster’s duct and the special surface finish of the two cones guarantee an increased efficiency compared to direct competitors.
The cost does not include taxes.
If you want to purchase more than 2 pieces, please contact our customer service via e-mail; we will make a special discount for you.
ROVCRAFT
Via Sabotino, 1 20847 Albiate (MB) -ITALY-
VAT number: 10103210968
(+39) 338 5052660
Description
Have you ever wanted to explore the oceans?
With Argo it will no longer be necessary to have a diving license!
Argo is a small playful drone in kit of the compact and versatile explorer class. Despite its classification, it can satisfy a wide range of needs: exploration, research, inspection, observation, ...
Argo is designed for intensive use, even in difficult environments. In fact, in addition to being resistant to impact and corrosion, it can dive down to 60 meters and reach a speed of 2.2 knots. The internal battery allows long immersion sessions, up to 2h 30min of moderate use.
Argo is one of a kind because it is not a single drone, it can be three!
Before assembling the components, you can choose between three configurations of our Jet 300 engines, namely A, B or C.
Configuration C consists in the installation of Inclinators (optional) which allow to angle the Jet 300 adding a sixth degree of freedom to the little drone.
Configuration A
Configuration B
Configuration C
A Land Station is provided to control Argo from the ground. The Station consists of a practical and waterproof case with a 9 "monitor, to which a Joystick is connected. It makes piloting simple and intuitive.
The Land Station is connected to Argo through a special quality 60 meters long cable, specifically produced for marine use.
The cable does not interfere with Argo's maneuvers at all, because it has a hydrostatic balance close to zero in water. It has a Kevlar sock which resists a traction force of several hundred kg.
This makes sure that it is possible to recover the drone by dragging the cable, without risking breakage of the cable itself.
An optional cable reel for long sizes is available.
We provide everything for you to be able to assemble your Argo, starting from the mechanical part up to the two Argo and Land Station software. The softwares are written on an Arduino basis, therefore they can be easily modified and improved according to personal needs.
The option of mounting an action camera (GoPro or similar) together with the compensation float is available as an option.
In the Box
DRONE
1 mechanichal set of Argo
1 electronic set of Argo
6 Jet 300 thrusters
2 LED lights of 8W
1 Battery Pack of 8.5Ah
1 navigation Camera
1 software Argo
LAND STATION
1 mechanichal set of Land Station
1 electronic set of Land Station
1 monitor of 9"
1 PS2 controller
1 Battery Package
1 Battery Charger
1 software for Land Station
CABLE
60m of termined cable
Details
max Depth 60m
max Velocity 2.2kn
Battery lasts 2h 30min on average
Depth tracker
Integrated Accellerometer and Gyroscope
Navigation Compass
Internal Water Leaks Detector
3 configurations in 1 available
Time to Assemble 3h on average
Software on Arduino Nano
Action cameras can be mounted (GoPro or other)
